| Blair Street Bridge | |
| Carries: | Lyell Highway |
| Crosses: | River Derwent |
| Mainspan: | 116feet |
| Length: | 650feet |
| Width: | 41feet |
| Height: | 15feet |
| Below: | 15feet |
| Locale: | New Norfolk |
| Location: | Tasmania, Australia |
| Also Known As: | New Norfolk Bridge |
| Maintained: | Department of Infrastructure, Energy and Resources |
| Design: | Concrete and steel girder bridge |
| Number Spans: | 6 |
| Piers In Water: | 5 |
| Lanes: | 2 |
| Begin: | 1971 |
| Open: | 1974 |
| Replaces: | Bridge Street Bridge |
The Blair Street Bridge is a concrete and steel girder bridge carrying the Lyell Highway through the township of New Norfolk across the River Derwent in Tasmania, Australia. Serving as a vital transportation link in the township's infrastructure, the bridge features a single carriageway with separated shared-use pathways on both sides. Completed in 1974, it is the fourth bridge to be constructed at New Norfolk, with the development aimed at withstanding valley floods before the establishment of the Meadowbank weirs.
Generally known as the "New Norfolk Bridge", similarly placed bridges at New Norfolk have a rich history dating back to the early 19th century. The first wooden bridge constructed across the River Derwent at Bridge Street, near the contemporary Blair Street Bridge was completed in 1834.This bridge was a pivotal development, connecting New Norfolk with the surrounding regions for the first time, facilitating transportation and trade. It was built under the direction of Assistant Surveyor General William Sharland, who owned the 1825 property known as Woodbridge. A toll was collected for crossing the bridge, which was eventually abolished in July, 1880.[1] The River Derwent is highly susceptible to flooding[2] and over time, subsequent bridges in 1880[3] and 1931[4] were built near the same location.[5] The remnants of the first three bridges, including materials from the original 1834 structure and the later Victorian dressed-sandstone of the second bridge, can still be observed near Woodbridge at the end of Bridge Street.
Before the construction of the Blair Street Bridge, the town of New Norfolk relied on an aging steel and concrete bridge built in 1931 to facilitate transportation across the River Derwent. However, this bridge had become increasingly inadequate to meet the growing demands of modern traffic, characterised by substandard strength, limited width, and a load limit of imposed in 1966. Recognising the need for a more robust and efficient river crossing, plans were set in motion for the construction of a new bridge.
Construction began in August 1971 and finished within two and a half years at a cost of A$900,000.[6] Timber falsework aided river pier access during construction. Foundations use spread footings for abutments and driven piles for piers, ensuring stability and minimising settlement risks. Design emphasises longitudinal and lateral stability for resilience against flooding and adverse weather. Aesthetic features, like minimalist balustrading and lighting, enhance the bridge's modernist appeal. Hydraulic engineers evaluated factors such as river flow rates, water levels, and floodplain characteristics to determine the bridge's susceptibility to inundation during periods of high water.
To minimise the risk of flooding impacting the bridge and its approaches, several design features were incorporated into the Blair Street Bridge project. These included raising the bridge deck to a predetermined elevation above anticipated flood levels, providing sufficient clearance for floodwaters to pass underneath without causing structural damage. Additionally, the bridge's abutments and piers were reinforced to withstand the hydraulic forces exerted by floodwaters.
The completed Blair Street Bridge measures 650feet with six spans, each 116feet long over the river. It features reinforced concrete slabs for stability and steel girders fabricated by Russell Allport & Co in Moonah. The bridge design includes a 4.74% graded slope, easing to a 3% vertical curve on Montagu Street, ensuring resilience to heavy loads and adverse weather.
Upon its completion, the Blair Street Bridge represented a significant advancement in the town's infrastructure, offering improved safety, efficiency, and convenience for residents and visitors. The Blair Street Bridge eliminated the constraints imposed by the old structure, providing unrestricted access for vehicles and pedestrians while enhancing connectivity between the town's two main centres of development.